### Nov 2022

- [JAC205] Analyzing the Torque Characteristics of IPM Motors Using a Thermal Equivalent Circuit Application Note NEW
- [JAC284] Analysis of Minute Electromagnetic Forces Acting on a Magnet NEW

### Oct 2022

- [JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT Upd
- [JAC269] Creating Three-Phase Induction Motor Efficiency Maps Accounting for Harmonics NEW
- [JFT012] JMAG-RT Model Generation of Wound-Field Synchronous Motor Upd
- [JFT045] Inheriting Settings when Updating CAD Upd
- [JFT047] Performing Harmonic Loss Calculations with Current Control in JMAG-Designer Upd
- [JFT058] Creating Efficiency Maps Using JMAG-Designer (Speed Priority Mode) Upd
- [JFT077] Creating JMAG-RT Models with Generic Circuit Topology Upd
- [JFT095] Obtaining Distribution Data from a Results File Upd
- [JFT114] Correcting Efficiency Maps Using Scripts Upd
- [JFT134] Inheritance Between Current Waveform Studies Upd

### Sep 2022

- [JAC279] Thermal Analysis Accounting for Cooling of the IPM Motor Upd
- [JFT003] Evaluation of Hysteresis Loops and Loss Density Distributions inside an Electromagnetic Steel Sheet Upd
- [JFT012] JMAG-RT Model Generation of Wound-Field Synchronous Motor Upd
- [JFT014] Physical Amount Calculation for Any Cross Section Upd
- [JFT015] Procedure for Two Way Coupled Analysis with JMAG and STAR-CCM+ Taking Thermal Fluid into Account (Ver17.0 and After) Upd
- [JFT016] Controlling Mesh Generation Method for Each Part Upd
- [JFT019] Setting an FEM Conductor Condition for a Set of Parts Upd
- [JFT020] Inheritance of Analysis Content by Analysis Template Upd
- [JFT021] Setting Magnet Material with Coercive Force Distribution and Residual Magnetic Flux Distribution Considering Temperature Dependence Upd
- [JFT022] File Export of a Physical Quantity by Multi-Purpose File Export Tool Upd
- [JFT023] Frequency Component Analysis of Distributions Obtained by Transient Response Analysis Upd
- [JFT027] Procedure for Adding Cases Using Equations (Parametric Analysis) Upd
- [JFT028] Procedure for Adding Cases Using Materials (Parametric Analysis) Upd
- [JFT029] Procedure for Adding Cases Using Point Sequences (Parametric Analysis) Upd
- [JFT030] Procedure for Adding Cases with a Dimension as a Design Parameter (Parametric Analysis) Upd
- [JFT031] Procedure for Adding Dimension Cases Using Equations (Parametric Analysis) Upd
- [JFT032] Evaluation Graph Displaying for Design Parameters (Parametric Analysis) Upd
- [JFT033] Eccentricity Setting for Parallelly Moving the Motion Region Initial Location Upd
- [JFT034] Eccentricity Setting for Parallelly Offsetting the Rotation Axis Upd
- [JFT035] Eccentricity Setting for Inclining the Motion Region Axis Upd
- [JFT036] Eccentricity Setting for Inclining the Rotation Axis Upd
- [JFT039] Procedure for Removing Overlapping Sections of Two Parts Upd
- [JFT040] Creating Specified Outputs Using Distribution Results Upd
- [JFT041] Simple Skew Analysis Using Results Data Upd
- [JFT042] A Method for Obtaining a Steady-State Solution at an Early Stage (Time Periodic Explicit Error Correction) Upd
- [JFT044] Pre-Post and Solver Parallel Distributed Processing Using SSH Upd
- [JFT046] Analysis Group Inheritance Using an Analysis Template Upd
- [JFT048] Brush / Commutator Component Upd
- [JFT049] Grouping FEM Coil Conditions Upd
- [JFT050] Procedure for Exporting a Selected Study from a Project Upd
- [JFT051] Creating and Using Geometry Templates Upd
- [JFT052] Creating a Motor Geometry Using a Geometry Template Upd
- [JFT053] Magnet Magnetization Direction Inheritance Using an Analysis Template Upd
- [JFT062] Creating a Geometry Using a Geometry Template (Python) Upd
- [JFT069] Performing Harmonic Loss Calculations Accounting for Current Control with JMAG-Designer and JMAG-RT Upd
- [JFT082] Automatic Report Creation Including Contour Plots When Running Multi-case Calculations Upd
- [JFT110] Evaluating the Effect of the Large Number of Holes Generated by Topology Optimization Upd
- [JFT112] Defining Response Values with Scripts in Topology Optimization Using NGnet Upd
- [JFT163] How to Output the Input Files for the Calculation of Multiple Cases at a High Speed NEW
- [W-MA-49] Necessity and Approach of Stray Load Loss Analysis Upd
- [W-SE-94] Improving Automatic Mesh Generation Speed for 3D Solid Models NEW

### Aug 2022

- [JAC018] Thermal Analysis of a Motor Upd
- [JAC203] No-Load Test Analysis of Power Transformer Upd
- [JAC219] Axial Gap Type Motor Cogging Torque Analysis Upd
- [JAC262] IPM Motor Thermal Demagnetization Analysis with Incomplete Magnetization of Dy Diffusion Magnets Upd
- [JFT013] Create of a Truncated Pyramid Shape Using the Loft Function Upd
- [JFT017] Geometry Creation Using Wire Template Upd
- [JFT025] Creating a Graph Showing the Correlation between Time History Physical Quantities Upd
- [JFT026] Procedure for Adding Cases Using Select Parameters (Parametric Analysis) Upd
- [JFT037] Displaying Differences in Distributions Upd
- [JFT067] Preview of Output Electromagnetic Force Using the Multi-Purpose File Export Tool Upd
- [JFT069] Performing Harmonic Loss Calculations Accounting for Current Control with JMAG-Designer and JMAG-RT Upd
- [JFT071] Creating User-Defined Calculation Components Upd
- [JFT101] Condition Settings Using the Response Values of Other Studies Upd
- [JFT102] Setting 3D Model Coils Using the Winding Editor Upd
- [JFT108] Creating a 3D Mesh Model from a 2D Mesh Model Upd
- [JFT159] How to Create Motor Design Using Models & Scenarios Upd
- [JFT161] Remote Execution for Analysis Using SSH and PBS Options Upd
- [W-VI-97] Correlation Analysis for Matching Stiffness between Actual Machine and Analysis Modelt NEW

### Jul 2022

- [JAC205] Analyzing the Torque Characteristics of IPM Motors Using a Thermal Equivalent Circuit Upd
- [JAC279] Thermal Analysis Accounting for Cooling of the IPM Motor NEW Upd
- [JFT024] Remote Execution of Analysis Using SSH Upd
- [JFT060] Processing Measured Hysteresis Curves Upd
- [JFT105] A CAD Link Function to 3D CAD Software NX Upd
- [JFT114] Correcting Efficiency Maps Using Scripts Upd
- [JFT156] Creating Shapes Using NGnet Weight NEW
- [JFT157] How to Output the Physical Quantities of Multiple Cases to Files in Batches by Using the Multi-Purpose File Export Tool NEW
- [JFT158] Several Circuit Conversion Sets NEW
- [JFT159] How to Create Motor Design Using Models & Scenarios NEW
- [JFT160] How to Run Parametric Analysis With Changes Made to the Number of Model Slots and Poles for Motor Thermal Analysis Accounting for Cooling NEW
- [JFT161] Remote Execution for Analysis Using SSH and PBS Options NEW
- [W-MA-76] Material Modeling Method for Electromagnetic Field/Iron Loss Analyses Considering Residual Strain NEW
- [W-SE-95] Improvement in Generation of Three-Dimensional Skin Mesh Upd
- [W-MO-114] Comparison of Efficiency Map with Measurement Upd

### Jun 2022

- [JFT103] Performing Topology Optimization Using Density Method Upd
- [W-MA-67] On the Geometry Edge Effects in Laminated Steel Sheet Eddy Current Loss Analysis Upd
- [W-SE-98] Improved Durability for Automatic Mesh Generation NEW
- [W-MA-100] Introducing the Detailed Analysis Method for Electromagnetic Steel Sheet for High-Precision Loss-Assessment NEW
- [W-OP-119] Global Design Search of Multi-Objective Multi-Constraint Optimization Issues by Narrowing Down Design Spaces Upd

### May 2022

- [JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets Upd
- [JFT079] Applying the Extended Slide Function to a Translation Motion Model Upd
- [JFT143] How to Run Control Simulations Using Only JMAG-RT and a Circuit Upd
- [W-MO-164] Investigation in the Accuracy of FEA Based Efficiency Maps for PMSM Traction Machines NEW
- [W-OP-165] Solving Geometry Conflicts in GA Optimizations with Large Numbers of Geometric Parameters NEW
- [W-OP-166] Sensitivity Study of Configuration of Large Scale Multi-Objective Optimization of a PMSM NEW
- [W-MB-167] Motor Plant Model Considering AC Loss for Control Calibration NEW
- [L-SE-163] High Performance Massive Case Calculations NEW

### Apr 2022

- [JAC235] Reactor Core Stray Loss Analysis Upd
- [W-SE-99] High Speed Magnetic Field Analysis with SMP Solver NEW
- [W-MB-151] Accuracy of Motor Plant Model Required for Control Calibration NEW
- [W-MB-152] Accuracy of Motor Plant Model Required for ECU testing NEW
- [W-MB-153] Accuracy and Speed Verification of Motor Plant Models Accounting for Spatial Harmonics NEW
- [W-MB-155] Accuracy of 6-Phase Motor Plant Models for Detecting Faults at Disconnections NEW
- [W-MB-156] Improving Motor Plant Model Accuracy by Accounting for Harmonic Iron Loss NEW
- [W-MB-157] Evaluation of the Effect of Resolver Eccentricity on PM Motor Torque Ripple Control NEW

### Mar 2022

- [JAC017] Inductance Analysis of an IPM Motor Upd
- [JAC138] Vibration Analysis of an SR Motor Upd
- [JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT Upd
- [JAC223] Multi-Objective Optimization of an IPM Motor Account Stress at High-Speed Rotation Upd
- [JAC267] IPM Motor Topology Optimization Using the Density Method NEW
- [JAC273] Creating IPM Motor Efficiency Maps Accounting for AC Loss Upd
- [JFT121] Calculating Energy Consumption During Drive Cycle Using Efficiency Maps Upd
- [JFT149] How to Create JMAG-RT Model with JMAG Designer and Run Consecutive Control Simulation Upd

### Feb 2022

- [JAC278] Creating Six-Phase Induction Motor Efficiency Maps NEW
- [JFT056] Using an Electromagnetic Force Output Script for NVH Upd
- [JFT065] Obtaining Part Face Area and How to Set Conditions Upd
- [JFT070] Creating PM Motor Efficiency Maps Using JMAG-Designer (Accuracy Priority Mode) Upd
- [JFT124] Searching for the Parameter Range Reducing Geometry Collapse During Optimization Calculations Upd
- [JFT148] How to Set an Electrical Component for Each Wire Using Winding Editor NEW
- [JFT149] How to Create JMAG-RT Model with JMAG Designer and Run Consecutive Control Simulation NEW
- [JFT150] Running Calculations of Multiple Studies Connected on Circuits NEW
- [JFT151] Coil Creating Method Using Beams NEW
- [JFT152] Output of Response Values Using Surrogate Models NEW
- [JFT153] Topology Optimization Calculations Using CNN Surrogate Models NEW
- [JFT154] Automatic Generation of Motor Thermal Analysis Model of Rotating Machine that Accounts for Cooling NEW

### Jan 2022

### Dec 2021

- [JAC107] Current voltage characteristics analysis of flyback converters Upd
- [JAC165] Creating IPM Motor Efficiency Maps Upd
- [JAC209] Magnetic Measurement Analysis Accounting for Eddy Currents Upd
- [JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motors Upd
- [JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets Upd
- [JAC224] Wireless Power Transfer Device Stray Loss Analysis Upd
- [JAC268] SPM Motor Teeth Geometry Topology Optimization Upd
- [JFT097] Optimization Execution Using Material Characteristics as Design Variables Upd

### Nov 2021

- [JAC008] Analysis of an Axial Gap Motor Upd
- [JAC072] Analysis of Attractive Force between Steel Plates and a Magnet Upd
- [JAC115] Eccentricity Analysis of an SPM Motor Upd
- [JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization Upd
- [JAC217] Creating Efficiency Maps for 3-Phase Induction Motors Upd
- [JAC233] Induction Heating Coil Optimization Upd
- [JFT011] Tooth Electromagnetic Force Monitoring During Control Simulation Upd
- [JFT069] Performing Harmonic Loss Calculations Accounting for Current Control with JMAG-Designer and JMAG-RT Upd

### Oct 2021

- [JAC226] Vibration Characteristics Analysis of SPM Motors Upd
- [JAC234] Vibration Characteristics Analysis of an Induction Motor Upd
- [JAC240] NT Characteristics Analysis of an IPM Motor Using PAM Drive Upd
- [JAC268] SPM Motor Teeth Geometry Topology Optimization Application Note NEW
- [JFT120] The Symmetric Hysteresis Loop Creation Function for Play Models Upd
- [JFT139] Coil Modeling for Axial Gap Type Rotating Machines Using Coil Template and Winding Editor NEW
- [JFT142] Creating Shapes Using a Local Coordinate System NEW

### Sep 2021

- [JAC165] Creating IPM Motor Efficiency Maps Upd
- [JAC228] Induction Motor Thermal Analysis Upd
- [JFT070] Creating PM Motor Efficiency Maps Using JMAG-Designer (Accuracy Priority Mode) Upd
- [JFT058] Creating Efficiency Maps Using JMAG-Designer (Speed Priority Mode) Upd
- [JFT124] Searching for the Parameter Range Reducing Geometry Collapse During Optimization Calculations Upd
- [JFT135] Distributed Execution of Topology Optimization Calculation Using SSH NEW
- [JFT137] Current Restraints using Conditional Branches of Equation NEW
- [JFT138] Creating Vector Expression Data and Using Vector Expressions NEW
- [JFT140] Motor Design Using JMAG-Express NEW
- [JFT141] JMAG-RT Model Data File Creation Function in JMAG-Designer NEW
- [JFT143] How to Run Control Simulations Using Only JMAG-RT and a Circuit NEW
- [JFT144] Flux Linkage Calculations in a Specified Position NEW
- [JFT145] How to Arrange Windings That Are in Parallel Circuits on Specified Layers NEW
- [JFT146] Optimization Calculation Using Surrogate Models NEW
- [JFT147] Creating a Lookup Table Using Parametric Analysis NEW

### Aug 2021

- [JAC113] Power Transmission Analysis of a Wireless Power Transfer System with Opposing Cores Upd
- [JAC227] Circuit Control Simulation for Three-Phase Induction Motor Upd
- [W-MO-12] Comparative Evaluation of Synchronous Impedance of a 2D Model and a 3D Model Upd
- [W-SE-101] Detailed Eddy Current Analysis of End Winding with Parallel Processing Upd

### Jun 2021

- [W-MB-66] Accuracy Improvements in the JMAG-RT Induction Machine Model Upd
- [JAC210] Torque Decoupling of In-out Magnet Coupling Upd
- [JAC264] Creating 6-Phase IPM Motor Efficiency Maps Upd
- [JAC265] Creating Synchronous Reluctance Motor Efficiency Maps Upd

### May 2021

- [JAC276] Six-Phase IPM Motor Harmonic Iron Loss Analysis NEW
- [JFT058] Creating Efficiency Maps Using JMAG-Designer (Speed Priority Mode) Upd
- [JFT122] Executing Optimization Calculations Using Reduced Order Models NEW
- [JFT124] Searching for the Parameter Range Reducing Geometry Collapse During Optimization Calculations Upd
- [JFT125] Inheriting Operating Points Between Modes in Efficiency Map Studies NEW
- [JFT126] Vectorizing Signals in a Control Circuit (MUX, DEMUX) NEW
- [JFT127] Changing Settings for Parallel Computing When Executing Calculations NEW
- [JFT128] Evaluating Drive Cycle Time Using Efficiency Maps NEW
- [JFT129] Adding Efficiency Map (Speed Priority Mode) Response Values NEW
- [JFT131] Evaluating Degrees of Similarity for Geometry Using NGnet Weight NEW
- [JFT132] Simultaneous Parameter and Topology Optimization NEW
- [JFT133] System Loss Evaluations in System-Level Simulations NEW
- [JFT134] Inheritance Between Current Waveform Studies NEW
- [JFT136] Sending SSH Settings to Remote Machines NEW

### Apr 2021

- [JAC032] Analysis of a Transformer Upd
- [JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor Upd
- [JAC211] IPM Motor Wire Joule Loss Analysis Upd
- [JAC260] Creating Axial Gap-Type Motor Efficiency Maps NEW
- [JAC262] IPM Motor Thermal Demagnetization Analysis with Incomplete Magnetization of Dy Diffusion Magnets Upd
- [JAC277] Vibration Analysis of Axial Gap-Type Motors NEW
- [JFT112] Defining Response Values with Scripts in Topology Optimization Using NGnet Upd
- [JFT123] Accounting for Residual Strain Upd
- [W-MA-88] Improvements in Accuracy of Anomalous Eddy Current Loss Calculations (1) Upd
- [L-OP-25] Utilizing JMAG in Cloud Services Upd

### Mar 2021

- [JAC018] Thermal Analysis of a Motor Upd
- [JAC275] IPM Motor Iron Loss Analysis Accounting for the Effect of Residual Strain Upd

### Feb 2021

- [JAC233] Induction Heating Coil Optimization Upd
- [JFT073] Current Control with Induction Heating Work Temperature as Feedback Using User Subroutines Upd
- [JFT120] The Symmetric Hysteresis Loop Creation Function for Play Models Upd
- [L-OP-34] Using MATLAB’s Optimization Engine in JMAG NEW
- [W-OP-96] Necessity of GA for Multi-Objective Optimization of Drive Motor Upd

### Jan 2021

- [JAC227] Circuit Control Simulation for Three-Phase Induction Motor Upd
- [JAC231] Vector Control Simulation of a Synchronous Reluctance Motor Upd
- [JFT024] Remote Execution of Analysis Using SSH Upd
- [JFT114] Correcting Efficiency Maps Using Scripts Upd
- [JFT116] Creating Rotating Machine Coil Geometry Accounting for Arbitrary Winding Methods Upd
- [JFT118] Distributed Processing for Parameter Optimization Calculations Using SSH Upd
- [JFT121] Calculating Energy Consumption During Drive Cycle Using Efficiency Maps Upd

### Dec 2020

- [JAC230] 6-Phase SPM Motor Inverter Fault Simulation Upd
- [JAC275] IPM Motor Iron Loss Analysis Accounting for the Effect of Residual StrainNEW

### Nov 2020

- [JAC165] Creating IPM Motor Efficiency Maps Upd
- [JAC274] SPM Motor Thermal Demagnetization Analysis Using Bonded NdFeB Magnets NEW
- [JFT108] Creating a 3D Mesh Model from a 2D Mesh Model Upd
- [JFT114] Correcting Efficiency Maps Using Scripts NEW
- [JFT115] Recalculating Electromagnetic Force and Torque Waveforms NEW
- [JFT116] Creating Rotating Machine Coil Geometry Accounting for Arbitrary Winding Methods NEW
- [JFT117] Parametric Analysis Method for Motors Possessing Wire Geometry with the Number of Poles and Slots as Design Variables NEW
- [JFT120] The Symmetric Hysteresis Loop Creation Function for Play Models NEW
- [JFT121] Calculating Energy Consumption During Drive Cycle Using Efficiency Maps NEW
- [JFT123] Accounting for Residual Strain NEW
- [JFT124] Searching for the Parameter Range Reducing Geometry Collapse During Optimization Calculations NEW

### Oct 2020

- [JAC233] Induction Heating Coil Optimization Upd
- [JFT118] Distributed Processing for Parameter Optimization Calculations Using SSH NEW
- [JFT120] The Symmetric Hysteresis Loop Creation Function for Play Models NEW

### Sep 2020

- [JFT006] Providing Tools Using Scripts – Rotation Pattern Coil Setting (2D) Upd
- [JFT009] Providing Tools Using Scripts – Capacitance Coefficient Calculations Upd
- [JFT087] Iron Loss Analysis Using Iron Loss Characteristics Data Upd
- [JFT088] Iron Loss Analysis Using Iron Loss Characteristics Data (Isolation of Excess Eddy Current Loss) Upd
- [JFT089] Iron Loss Analysis Using a Play Model and Lamination Analysis Upd
- [JFT090] Iron Loss Analysis Using a Play Model and Lamination Analysis (Excess Eddy Current Loss Taken Into Account) Upd
- [JFT091] Taking into Account Iron Loss in Magnetic Field Analysis Upd

### Aug 2020

- [JAC038] Starting Performance Analysis of a Single Phase Induction Motor Upd
- [JAC272] Thrust Analysis of Linear Actuator with a Curved Section Upd
- [JFT002] Geometry Parametric Analysis Using Direct Modeling Upd
- [JFT043] Frequency Filter Calculation on Distribution Amounts Obtained with Transient Response Analysis Upd
- [JFT091] Taking into Account Iron Loss in Magnetic Field Analysis NEW

### Jul 2020

- [JAC205] Analyzing the Torque Characteristics of IPM Motors Using a Thermal Equivalent Circuit Upd
- [JAC268] SPM Motor Teeth Geometry Topology Optimization NEW
- [JAC271] Axial Gap Type Motor AC Copper Loss Analysis Upd
- [JAC272] Thrust Analysis of Linear Actuator with a Curved Section NEW
- [JAC273] Creating IPM Motor Efficiency Maps Accounting for AC Loss NEW
- [JFT113] Running Calculations by Grouping Multiple Jobs Using SSH NEW
- [W-MO-114] Efficiency Map Measurement Comparisons Upd
- [W-MO-119] Global Design Search of Multi-Objective Multi-Constraint Optimization Issues by Narrowing Down Design Spaces NEW

### Jun 2020

- [JAC165] Creating IPM Motor Efficiency Maps Upd
- [JAC225] Induced Voltage Analysis on Memory Motors Using Variable Magnets Upd
- [JAC230] 6-Phase SPM Motor Inverter Fault Simulation Upd
- [JAC257] IPM Motor Topology Optimization NEW
- [JAC259] Automatically Searching for Current Phase that Obtains Maximum Torque and Evaluating Torque Characteristics Upd
- [JAC264] Creating 6-Phase IPM Motor Efficiency Maps NEW
- [JAC265] Creating Synchronous Reluctance Motor Efficiency Maps NEW
- [JAC271] Axial Gap Type Motor AC Copper Loss Analysis NEW
- [JFT018] Creating Rotating Machine Coil Geometry Using Coil Templates Upd
- [JFT054] Output Types for the Spatial Modes of Electromagnetic Force Using FFT Upd
- [JFT109] Comparing Efficiency Maps and Loading External Data NEW
- [JFT110] Evaluating the Effect of the Large Number of Holes Generated by Topology Optimization NEW
- [JFT111] Accounting for Arbitrary Motions NEW
- [JFT112] Defining Response Values with Scripts in Topology Optimization Using NGnet NEW
- [W-SE-145] Highly Parallel Solver Performance Evaluation (Induction Heating) NEW

### May 2020

- [JFT095] Obtaining Distribution Data from a Results File Upd
- [JFT103] Performing Topology Optimization Using Sensitivity Analysis Upd
- [W-OP-96] Necessity of GA for Multi-Objective Optimization of Drive Motor NEW
- [W-SE-101] Detailed Eddy Current Analysis of End Winding with Parallel Processing NEW

### Mar 2020

- [JAC262] IPM Motor Thermal Demagnetization Analysis with Incomplete Magnetization of Dy Diffusion Magnets NEW Application Note
- [JAC223] Multi-Objective Optimization of an IPM Motor Account Stress at High-Speed Rotation Upd
- [JFT106] Multistage Analysis Using a Vector Potential Boundary Condition Upd

### Feb 2020

- [JAC252] Geometry Optimization of a Solenoid Valve Upd
- [JAC258] Magnetic Shield Geometry Optimization NEW
- [JAC259] Automatically Searching for Current Phase that Obtains Maximum Torque and Evaluating Torque Characteristics NEW Application Note
- [JAC261] SPM Motor Magnet Coercive Force Optimization For Obtaining Sinusoidal Magnetization NEW
- [JAC262] IPM Motor Thermal Demagnetization Analysis with Incomplete Magnetization of Dy Diffusion Magnets NEW
- [JAC263] IPM Motor Stress Analysis Taking Into Account Friction between Magnets and the Rotor Core NEW
- [W-MO-17] Alternator Analysis Using Tetrahedral/Pentahedral Mixed Mesh Upd
- [L-MA-04] New & Improved Iron Loss Analysis Function NEW
- [L-HU-08] Complex 3D Models to FEA Models Within Short Timeframes NEW

### Jan 2020

### Dec 2019

- [JAC030] Magnetization Field Evaluation of an SPM motor Upd
- [JAC151] Insulation Evaluation Analysis of a Power Transformer Upd
- [JAC165] Creating IPM Motor Efficiency Maps Upd
- [JAC200] Iron Loss Analysis of IPM Motor using Hysteresis Model Upd
- [JAC236] Magnetic Circuit Optimization for Plastic Magnets in an Axial Magnetic Field Upd
- [JAC259] Maximum Torque Current Phase Search and Torque Characteristics Evaluation NEW
- [JFT070] Creating a PM motor Efficiency Map Using JMAG-Designer (Accuracy Priority Mode) Upd
- [JFT092] Mesh Model Skew Deformation NEW
- [JFT093] Shape Modification Using the Morphing Function (Moving Only Nodes on a Specified Edge) NEW
- [JFT094] Parametric Analysis of Material Properties NEW
- [JFT095] Obtaining Distribution Data from a Results File NEW
- [JFT096] Performing Parametric Analysis Using an Analysis Parameter View NEW
- [JFT097] Optimization Execution Using Material Characteristics as Design Variables NEW
- [JFT098] Automatic Thread Allocation During Local Job Execution NEW
- [JFT099] Mixing Manual Mesh and Auto Mesh NEW
- [JFT100] Material Allotment per Element NEW
- [JFT101] Condition Settings Using the Response Values of Other Studies NEW
- [JFT102] Setting 3D Model Coils Using the Winding Editor NEW
- [JFT103] Performing Topology Optimization Using Sensitivity Analysis NEW
- [JFT104] Application of an Anomalous Eddy Current Loss Factor Dependent on Magnetic Flux Density and Frequency NEW
- [JFT105] A CAD Link Function to 3D CAD Software NX NEW
- [JFT106] Multistage Analysis Using a Vector Potential Boundary Condition NEW
- [JFT108] Creating a 3D Mesh Model from a 2D Mesh Model NEW
- [W-MB-102] Motor Efficiency Map Evaluation for Model-Based Development (MBD) Using FEA Simulation NEW
- [W-SE-113] Reduction of calculation time using Equivalent Circuit model NEW

### Nov 2019

- [JFT082] Automatic Report Creation Including Contour Plots When Running Multi-case Calculations Upd
- [JFT089] Iron Loss Analysis Using a Play Model and Lamination Analysis Upd
- [W-MA-88] Improvements in Accuracy of Anomalous Eddy Current Loss Calculations (1) Upd
- [W-MA-111] Improvements in Accuracy of Anomalous Eddy Current Loss Calculations (2) NEW
- [W-MO-114] FEA efficiency map compared to measurements NEW
- [L-MO-105] System Design with Model-based Efficiency Map (Speed Priority Mode) NEW
- [L-MO-106] Prototype and Performance Evaluation with Model-based Efficiency Map (Accuracy Priority Mode) NEW
- [L-OP-107] Parameterize the Number of Poles and Slots NEW
- [L-MO-108] Motor Performance Evaluation Considering Control NEW
- [L-OP-109] Exploration of New Ideas Using Topology Optimization NEW
- [L-MU-110] Reaching Steady-State at an Early Stage Using a Control Circuit Containing a JMAG-RT Model NEW
- [L-MO-115] Performance Evaluation of Induction Motors Using Efficiency Maps NEW
- [L-SE-116] Accuracy Improvement of Electromagnetic Force Calculation Using Correction NEW
- [L-SE-117] Dealing with Non-Conforming Mesh NEW

### Sep 2019

- [JAC228] Induction Motor Thermal Analysis Upd
- [JFT085] Detailed Rotation Periodic Mesh Settings NEW
- [JFT086] Generating Variable Size Extruded Mesh NEW
- [JFT087] Iron Loss Analysis Using Iron Loss Characteristics Data NEW
- [JFT088] Iron Loss Analysis Using Iron Loss Characteristics Data (Isolation of Excess Eddy Current Loss) NEW
- [JFT089] Iron Loss Analysis Using a Play Model and Lamination Analysis NEW
- [JFT090] Iron Loss Analysis Using a Play Model and Lamination Analysis (Excess Eddy Current Loss Taken Into Account) NEW

### Aug 2019

- [JFT084] Procedure for Two-Way Coupled Analysis Taking into Account Fluid Force with JMAG and STAR-CCM+ NEW
- [JAC254] Vibration Analysis of a Large Oil-Filled Transformer Upd

### Jul 2019

- [JAC007] Analysis of a Spindle Motor Upd
- [JAC008] Analysis of an Axial Gap Motor Upd
- [JAC018] Thermal Analysis of a Motor Upd
- [JAC020] Sound Pressure Analysis of an SPM Motor Upd
- [JAC064] Thrust Force Analysis of a Coreless Linear Motor Upd
- [JFT070] Creating a PM motor Efficiency Map Using JMAG-Designer (Accuracy Priority Mode) Upd
- [L-MU-91] NVH analysis of EV drivelines with JMAG and Romax Nexus Upd

### Jun 2019

- [JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link) Upd
- [JAC255] Evaluating the N-T Curve of an IPM motor Using 3D Correction NEW
- [JFT056] Using an Electromagnetic Force Output Script for NVH Upd
- [JFT057] How to Run Topology Optimization Upd
- [JFT068] Specifying Three-Phase Synchronous Motor dq Axis Current Upd
- [JFT074] High Accuracy Electromagnetic Force Calculation with the Correction Method and Adaptive Mesh NEW
- [JFT078] Stopping an Analysis Automatically After Reaching Steady-State NEW
- [JFT079] Applying the Extended Slide Function to a Translation Motion Model NEW
- [JFT081] Creating an Induction Motor Efficiency Map Using JMAG-Designer (Speed Priority Mode) NEW
- [JFT082] Automatic Report Creation Including Contour Plots When Running Multi-case Calculations NEW
- [JFT083] Automating the Multi-Purpose File Export Tool with Command Lines NEW

### May 2019

- [JAC228] Induction Motor Thermal Analysis NEW Application Note
- [JFT011] Tooth Electromagnetic Force Monitoring During Control Simulation Upd
- [JFT080] Direct Coupling between MATLAB/Simulink and JMAG NEW

### 2019年4月

- [JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation Upd
- [JAC240] NT Characteristics Analysis of an IPM Motor Using PAM Drive Upd
- [JAC244] Magnetic Field Strength Analysis at a Sensor Position Upd
- [JAC246] Analysis of Electromagnetic Force Acting Between a Coil and a Magnet NEW Application Note
- [JAC251] Alternator Vibration Analysis Upd
- [W-MB-66] Accuracy Improvements in the JMAG-RT Induction Machine Model Upd
- [W-HU-71] Notes on Performance Evaluation and Hardware Selection of JMAG Parallel Solver Upd
- [W-MO-85] Efficiency Map Evaluations Considering Harmonic Loss Upd

### Mar 2018

- [JAC233] Induction Heating Coil Optimization NEW Application Note
- [W-MO-12] Comparative Evaluation of Synchronous Impedance of a 2D Model and a 3D Model Upd
- [W-MO-13] Evaluation of a 2D Brush Motor Analysis Accounting for 3D Geometry Upd
- [W-TR-15] Loss Evaluation of a Transformer Shield Based on the Homogenization Method Upd
- [W-MO-17] Alternator Analysis Using Tetrahedral/Pentahedral Mixed Mesh Upd
- [W-MO-24] Copper Loss Analysis of a Rotating Machine Using the Zooming Method Upd
- [W-MA-49] Necessity and Approach of Stray Load Loss Analysis Upd
- [W-MA-50] Effectiveness and Limits of 2D Analysis from Loss Analysis Upd
- [W-MA-51] Understanding Electromagnetic Phenomena in Steel Sheets Through Simulation Upd
- [W-MB-64] Modeling Loss in JMAG-RT Upd
- [W-MA-67] On the Geometry Edge Effects in Laminated Steel Sheet Eddy Current Loss Analysis Upd
- [W-SE-72] Reduction of Time Steps by Using Time Periodic Explicit Error Correction Method Upd
- [W-SE-73] Influence of Element Shapes Near the Coil on Convergence Upd
- [W-SE-74] Electromagnetic Force Calculations Using the Adaptive Function Upd
- [W-SE-75] Iterative Calculations and Convergence Characteristics Upd

### Feb 2019

- [JFT002] Direct Modeling – Region Move and Solid Move Upd
- [JFT038] Automation of JMAG using MATLAB Upd
- [JFT045] Inheriting Settings when Updating CAD Upd
- [JFT047] Performing Harmonic Loss Calculations with Current Control in JMAG-Designer Upd
- [JFT055] Variable Magnet Analysis Using Subroutines Upd
- [JFT058] Creating Efficiency Map Using JMAG-Designer(Speed Priority) Upd
- [JFT060] Processing Measured Hysteresis Curves Upd
- [JFT061] Creating Line Shapes Using Functions Upd
- [JFT062] Creating a Geometry Using a Geometry Template (Python) Upd
- [JFT063] A Method for Performing Parametric Analysis on a Motor Using the Number of Poles and Number of Slots as Design Variables Upd
- [JFT065] Obtaining Part Face Area and How to Set Conditions Upd
- [JFT066] Coil Settings Using Winding Editor Upd
- [JFT067] Preview of Output Electromagnetic Force Using the Multi-Purpose File Export Tool NEW
- [JFT071] Creating User-Defined Calculation Components NEW
- [JFT072] Specifying Stress Distribution with CSV File NEW
- [JFT073] Current Control with Induction Heating Work Temperature as Feedback Using User Subroutines NEW

Document type：

[JAC]……Application Catalog

[JFT]……Function Tutorial

[W-**-**]……White Papers

[L-**-**]……Leaflet